Thermostat MCS 350 WLAN

Tax included
  • ErP conform (EU) 2015/1188
  • digital, programmable temperature controller
  • user-friendly touch display
  • Free iOS and Android app
  • Access over the Internet
  • Manufacturer's guarantee: 2 years

WiFi thermostat for electric underfloor heating.
Control your underfloor heating from the comfort of your smartphone.

  • digital, programmable temperature controller
  • user-friendly touch display
  • Free iOS and Android app
  • Access over the Internet
  • Window open detection saves energy
  • ErP-compliant according to the Ecodesign Directive
  • Floor temperature sensor included in delivery
  • Manufacturer's guarantee: 2 years

The digital, programmable WiFi thermostat MCS350 is used to control electrical heating systems indoors and is also suitable for controlling water-based underfloor heating under certain conditions.

The MCS350 as part of the SST Cloud Mobile Comfort System enables the underfloor heating to be controlled remotely via the Internet, not only using a smartphone app, but also via a web browser - from anywhere and at any time. Of course, the settings (e.g. temperatures, times) can also be made directly via the touch display. Different rooms or apartments can be controlled with an unlimited number of thermostats. You can also easily invite family members via the SST Cloud and add them as additional users. Depending on their authorization, they can either manage the devices or just see the status. Particularly practical: You have the option of being automatically informed about certain events via e-mail (push notification). The device is very easy to operate thanks to the large, easy-to-read touch display with background lighting. The MCS350 enables you to control your heating system using the various operating modes "hold temperature", "program mode" and "frost protection mode".

The device has a floor sensor (included in the scope of delivery) and a room sensor (built into the device) for temperature control. The thermostat can thus be used for floor temperature control or room temperature control. It is also possible to activate the floor and room sensors at the same time. In this case, the thermostat regulates the floor temperature, while the maximum room temperature to be set is used to limit it.

In the “program mode” the MCS 350 thermostat works event-controlled, ie time intervals and desired temperatures (COMFORT and ECONOMY temperature) for four events (“wake up”, “leave”, “come”) can be set for each day of the week around the clock (24/7) "And" Go to bed) can be programmed. The time can be set in steps of 30 minutes and the temperature can be set in the range +5 ... +45 ° C. Depending on the event and day of the week, the thermostat then automatically regulates the heating to the programmed temperatures. The events “Wake up” and “Coming” are assigned to the COMFORT temperature, the events “Leaving” and “Going to bed” are assigned to the ECONOMY temperature.

If you are not going to use a room for a long time in winter and to avoid damage to the building, it is advisable to activate the "frost protection mode". The frost protection temperature can be set from + 5 ° C to + 12 ° C. "In the" Hold temperature "operating mode, a desired temperature in the range of + 12 ° C to + 45 ° C can be set, which the thermostat then maintains. Is the heating is switched on, this is indicated by a corresponding symbol on the display. In addition, the temperature controller has a window-open detection. In the event of a sudden temperature drop within a short period of time, the thermostat assumes that a window is open and consequently switches the heating on for the Duration of 30 minutes as a precaution * to save energy. The intelligent self-learning function (adaptive control of the start of heating) offers particular convenience.

The thermostat automatically calculates the required preheating time based on previous heating habits so that the set temperature is reached in good time at the programmed time. If necessary, the self-learning function can be deactivated.

With the functions and properties described, the MCS350 WiFi thermostat contributes to the energy-saving operation of your underfloor heating. The device can be reset to the factory settings at any time with a simple reset function.

The MCS350 also supports floor temperature sensors other than those included in the scope of delivery. The compatible sensor types can be found in the technical data.

The MCS350 thermostat can be flush-mounted and fits into common flush-mounted sockets with a device screw distance of 60 mm.

Regulation (EU) 2015/1188 Ecodesign or ErP conformity:

    electronic room temperature control and weekday control
    adaptive control of the start of heating (self-optimization / self-learning function / self-learning mode)
    Power consumption 0.45W