• -60%

Electric Underfloor Heating for tiles, stone and glued floorings 200 W/m²

CHF71.06 Save 60%
Tax included
  • Nominal power: 200 W/m
  • Fast warm up time
  • 100% maintenance free
  • 30 years warranty 



Corrugated Tube
Corrugated Tube
CHF5.02 CHF0.00


Electric floor heating systems with a power output of 200W/m² will be used as a primary heating source in rooms with a higher heat demand. As a rule, such rooms are in the cellar, under the attic, and in many cases conservatories.

Our electric heating mats can be installed under all floor coverings that are installed with a tile glue or where the heating mat is put into the leveling compound or screed (e.g. tiles, stone, glued parquet / carpet, etc.). When using a flooring type with the floating installation, we recommend our aluminum heating mats.


The use of a thermostat is mandatory when operating  electric underfloor heating. Choose your thermostat in a kit and save compared to the single unit prices. 

The heating mat is installed either in the screed or directly in the tile glue / leveling compound.

Electric underfloor heating should not be installed under stationary furniture without air circulation underneath (e.g kitchen cell). For this reason, the heating mat is generally installed with a wall spacing of at least 60 cm. In bathrooms, however, a wall distance of at least 3 cm will commonly be planned. The carrier material of the heating mat can be cut during installation but not the cable! Use the aid of our calculator to plan your underfloor heating.

We always recommend to use proper insulation with the underfloor heating to avoid unnecessary heat loss and consequential higher energy bills.

For an installation of the electric underfloor heating system under a glued flooring, a digital thermostat with display is to be selected (e.g. TP520, SE200 or MCS350), that allows a precise control over temperature and avoid damaging of sensible floor comerings (e.g. glued carpet, parquet, laminate).

10 Items